Transfer Print "FLORA & FAUNA - CHERRY BLOSSOMS" 28x40 cm

Transfer print “FLORA & FAUNA – CHERRY BLOSSOMS” 28×40 cm

Procedure:

Thanks to our “Magic Liquid” transferring our beautiful images will be even easier!

The design can be applied to all your restorations that have previously been varnished with chalk paint, and on fabrics, colored or not!

The steps are as follows:

1- Apply at least 2 coats of light paint and make sure it is perfectly dry.

2- Make the surface perfectly smooth with a fine abrasive sponge, sanding in the direction of the brushstroke and also against it.

3- Remove dust residues with a damp microfiber cloth and let it dry well.

4- Fix the sheet with the graphic you want to transfer face down with masking tape that does not damage surfaces.

5- Take a small brush and dip it into the transfer solution.

6- It is essential to transfer small parts of the design at a time, so apply the solution using the brush on small pieces of the design.

7- Apply the liquid on the lifted sheet, blow on the wet part to dry it slightly so as not to leave a color stain.

8- At this point, manually perform the transfer of the design, using the back of a teaspoon, pressing on the part moistened by the transfer.

9- Continue this way until the design is finished, moistening small parts at a time, keeping the sheet lifted, blowing, and transferring small amounts of the design by tracing it.

10- Until the work is finished, do not lift the sheet to check the work done, you might risk moving it slightly and irreparably ruining the final work.

11- After it is completely dry, protect the design and the paint as you like, with wax or protective coating.